SHERLINE ROTARY TABLE DESKCNC MANUAL

NOTE: Because components of the table are ground as a set during production, the P/N 3700 rotary table cannot be upgraded to the P/N 3700-CNC version later on. The rotary table is now also available with a stepper motor mount attached ready for the application of a stepper motor and CNC controls. It can also be useful on larger equipment when its compact size is called for. The Sherline rotary table is an extremely precise and well-built piece of equipment that is sized to fit with our product line.

SHERLINE ROTARY TABLE DESKCNC MANUAL

The 8-page manual covers the basics of rotary table use and takes the user through a typical project.ДЄny machinist desiring to take his capabilities to the ultimate levels should consider purchasing and learning to use a rotary table. The appearance is instrument quality with a black oxide base, precision ground finishes, and laser engraved markings.ДЄs with all Sherline tools, the illustrated instructions are very useful. An oiler is easily accessible to facilitate lubrication of the table. Worm gears are factory greased and the drives sealed to keep out chips and dirt. To maintain accuracy and frictionless movements, ball bearings are used. The rotary table has a unique table locking mechanism that is positive and does not move the table as it is locked. It is used to support and stabilize the other end of long work held in a chuck or otherwise attached to the rotary table.ДЄ ghost view of the rotary table drawn in SolidEdgeВ® by John Costello shows the internal mechanism so you can see how the worm gear drives the table. With the table mounted vertically, an optional adjustable right angle tailstock (P/N 3702) can be mounted to the mill table. An optional right angle attachment is available (P/N 3701) to mount the table in the vertical position to further increase its versatility. Also included is an adapter that allows SherlineвЂ™s 3- and 4-jaw chucks to be screwed directly to the rotary table. Comes with all screws needed and mounting hardware.You can use any of the MWHS01 with this kit.

Two hold-down clamps and T-nuts are provided with the table. Trunnion Table Kit allows you to mount the Modular Work Holding Plate to the Sherline Rotary on the Taig table. The table T-slots are identical to those used on the Sherline mill and lathe, making the vast line of Sherline tooling available for use with this product. Click on the Video tab above to seeВ examples of different weights and uses for our rotary tables. The rotary tables can hold more weight when they are not under a continuous load. weight when suspended 12вЂі away from the center of the rotary table)

Vertical rotational torque-6 foot/lbs.

NOTE: We are stating the following weight limits for our rotary tables for continual use. Seventy-two revolutions of the handwheel rotate the table one revolution. This allows a circle to be divided into 3600 increments without interpolation. The handwheel is divided into 50 parts, making each line on the handwheel 1/10В°.

These lines are calibrated with the 72-tooth worm gear that is driven by the handwheel. The table has been engraved with a laser, giving sharp and precise lines every 5В°, numbered every 15В°. The main components have been machined from solid bar stock steel, and the complete unit weighs seven pounds. This allows the table to be used as a 4th axis with CNC systems that have the capability to drive a rotary axis. The mount accepts a NEMA 23 frame size stepper motor for CNC control. The table is 2вЂі high and 4вЂі (100mm) in diameter. The Sherline CNC Ready Rotary Table offers a P/N 3700 manual 4 inch rotary table and a stepper motor mount with dampened coupling in place of the handwheel. SherlineвЂ™s rotary table is a precision piece of equipment that has been designed to work with their vertical milling machines however, it can be used on any mill whenever the small 4-inch size would be an advantage. The only limits are size, not complexity. It is the same plate that is included in our Modular fixture tooling set.A rotary table used in conjunction with a mill allows a machinist to produce virtually any part he can design. The base plate measures 1/2 x 4 x 14', and can be mounted to a Sherline mill table using the T-slots and standard Sherline T-nuts. It uses a 3700 Sherline rotary table, NOT the 3700-CNC version. This version is driven with an IMService Belt drive unit based on a Globe servo motor. The area where the vise is placed measures 4' x 7 1/2'. Rotary axis machining can also be accomplished.ДЄ Sherline mill vise is shown so that the scale of the mounting plate can be visualized. With a trunnion table, 3 sides of a rectangular shaped part can be machined with a single clamping and simple 90 degree indexing. It stabilizes the assembly so a right angle plate is not required. The Trunnion table securely attaches to the face of the Sherline rotary table. Mounts directly to a Sherline mill table using the Sherline t-slots. Rotary tables, vise, and mounting base belowВ are not included. Included Shelf is a 9 x 4 x 1/2 inch, cast aluminum fixture plate with 10-32 tapped holes on 1/2 inch centers. A second rotary table can be mounted onto the trunnion shelf ( flat mounting plate required is not included with this package).

Sherline rotary table deskcnc